For patients in severe pain, lying still during a 40-60 minute MRI can be almost impossible. A case from IMB Diagnostic Imaging Center (Imágenes Médicas Dr. Carlos Borelli) in Argentina shows how preparation, communication and individual positioning made a complete whole-spine study possible without repeated sequences.
Jerónimo Barbas, BSc, ARMRIT
MRI Service Lead · IMB Diagnostic Imaging Center in Comodoro Rivadavia
Jerónimo has led MRI services in Comodoro Rivadavia, Argentina, since 2015 and holds a master’s degree in medical physics. He is President of SOLAREM (Latin American Society of Magnetic Resonance), Course Leader MRI at Juan Agustín Maza University and a member of The Fourier Crew at Everything MRI.
In MRI, image quality depends on many factors: the scanner, the protocol, the coils, and the experience of the team. But in daily clinical practice, one of the most decisive factors is often much simpler: whether the patient is able to remain still.
This becomes especially challenging in patients with severe pain. For them, lying flat on the table is not just uncomfortable. It may be extremely difficult or almost impossible. Long examinations can therefore become a real test of preparation, communication, and positioning.
At IMB Diagnostic Imaging Center in Comodoro Rivadavia, Patagonia, Argentina, this situation occurred during the examination of a patient with advanced oncologic disease. The case showed very clearly that successful MRI in high-pain patients does not start with the first sequence. It starts much earlier, with the way the patient is prepared, listened to, and positioned.
In these situations, every minute matters. And every small detail can influence whether the examination can be completed successfully.
A 57-year-old male patient with a history of cancer and multiple bone metastases presented to the department in a wheelchair. He reported severe pain and marked limitations in positional changes.
From the outset, the patient described difficulties during previous imaging studies. He had struggled to remain still, examinations had been interrupted, and image quality had been affected by motion.
Given the clinical situation, the objective was clear: to obtain a complete diagnostic study in the shortest possible time, while minimizing discomfort and avoiding repeat acquisitions.
This was particularly important because the planned examination was a whole-spine MRI with contrast, which can last up to 40-60 minutes. Such examinations can be demanding even for patients without pain. For a patient with bone metastases and limited mobility, the challenge is much greater.
In high-pain patients, time on the MRI table should be used as efficiently as possible. Any avoidable delay in the supine position can increase discomfort and make it more difficult for the patient to remain still during the actual scan.
For this reason, several steps were completed before the patient entered the MRI room.
Peripheral venous access was established while the patient was still seated in the wheelchair. This avoided additional time on the table before contrast administration. The patient was also fully prepared before entering the scan room, including appropriate clothing and all required safety checks.
Figure 1: Re-enacted setup: venous access established and the patient prepared while still in the wheelchair, before transfer to the MRI table.
These measures may seem simple, but they can make a significant difference. For patients in severe pain, reducing table time is not only a workflow improvement. It is part of patient care.
At IMB Diagnostic Imaging Center, this type of preparation is particularly important because the department routinely examines a high volume of patients, including complex oncologic cases referred from across the region.
During transfer to the MRI table, one step was prioritized that is often underestimated: asking the patient how he could lie down with the least amount of pain.
This question changed the positioning process. Instead of forcing the patient into a standard setup, the team adapted the positioning to his physical limits. The patient knew best which movements caused pain and which posture was still tolerable. Involving him in the process helped reduce anxiety and build trust.
Once on the table, several positioning measures were used to support comfort and stability. A triangular viscoelastic wedge was placed under the knees to reduce lumbar strain. Additional head support was used to compensate for the rigidity of the neurovascular coil. Pneumatic headphones were positioned carefully to ensure full ear coverage and avoid pressure points.
Lateral head stabilization was also important. Pads and wedges were used to reduce involuntary motion, particularly in the cervical spine region, where even small movements can affect image quality.
In similar situations, positioning solutions such as PearlFit Wedges, MULTIPAD and ProFoam positioning aids can help improve patient stability while providing additional support and pressure relief, contributing to greater comfort throughout longer MRI examinations.
Figure 2: Example of supine positioning with a PearlFit Wedge under the knees & PearlFit Cushion head support (Pearl Technology).
In longer MRI examinations, comfort and safety are closely connected. The longer a patient has to remain still, the more important it becomes to avoid pressure points, uncomfortable contact areas, and positions that become painful over time.
Particular attention was paid to avoiding skin-to-skin contact, such as hands touching the thighs, thighs lying directly against each other, or crossed feet. This is relevant for comfort, but also for MRI safety, as avoiding conductive loops and direct contact can help reduce the risk of RF-induced burns.
Figure 3: Typical skin-to-skin contact points that can form conductive loops and should be separated during MRI (Pearl Technology).
All support points were checked carefully. The goal was not only to position the patient once, but to create a position that could be maintained throughout the entire acquisition.
Figure 4: Re-enacted setup: the hand rests on a pad beside the body instead of on the thigh.
Clear communication also played an important role. The patient was informed about the expected duration of the examination, the importance of remaining still, and what would happen during the scan. Calm reassurance helped the patient feel more in control, especially given his previous negative experiences with imaging.
Dedicated MR-safe positioning pads, such as the MR Safety Pad from Pearl Technology, can assist in maintaining appropriate separation between body surfaces, minimizing skin-to-skin contact while improving patient comfort and supporting safe positioning throughout prolonged MRI examinations.
Thanks to thorough preparation, adapted positioning, and continuous communication, the examination could be completed successfully.
No significant motion was observed. No sequences required repetition. A complete diagnostic study was achieved with high diagnostic value, and the patient was able to complete the procedure in the shortest possible time given his clinical condition.
Figure 5: Re-enacted setup: patient positioned in the bore for the whole-spine examination.
For the MRI team at IMB Diagnostic Imaging Center, the case was a strong reminder that positioning is not a secondary step in the workflow. In complex patients, it can determine whether the examination succeeds at all.
Success in prolonged MRI studies, especially in patients with severe pain or complex clinical conditions, does not rely solely on technology or protocol selection.
It is strongly influenced by the technologist’s ability to anticipate challenges, communicate effectively, and tailor positioning to the individual patient’s needs. In high-pain patients, a few minutes invested upfront may prevent many more minutes of discomfort, repeated sequences, or incomplete imaging.
Figure 6: Key steps for MRI in high-pain patients, from the wheelchair to the end of the scan. Illustration: Pearl Technology, based on this case.
This case shows that patient positioning is part of image quality, safety, workflow, and patient experience at the same time.
When every minute matters, careful preparation and individualized positioning can define the success of the entire examination.